Concrete cutting in Merced CA - clean, straight cuts and no slurry left in the street
Need a broken section out, a trench for a pipe or a new opening? We saw a straight line and leave the rest of the slab whole.
- Licensed and insured.
- Free in-person estimates.
- We reply within 1 business day.
What does concrete cutting involve, and what sets the price?
Concrete cutting in Merced means sawing a straight, clean line through a slab or wall with a diamond blade, so a damaged section can come out, a pipe trench can go in or a doorway can open up without cracking the concrete around it.
Most people who call us have a problem in one part of the concrete and want to keep the rest, like a sunken panel in the driveway, a plumber who needs to get under the garage floor, or an old slab that has to be trimmed before we pour a new patio against it. The price mostly moves with the surface we're cutting, how long and deep the cut runs, whether it's indoors or out, and whether you want the pieces broken up and hauled away or left in place. The schedule usually turns on getting any lines in the slab sorted out before the blade starts, and your written estimate spells out what's included and what isn't. We're based in Merced and work across the cities around it.
How do you know your concrete needs cutting, not tearing out?
One panel sunk or broken
If one section of your driveway or walk has dropped or shattered while the rest sits flat, the ground under that piece usually settled or washed out. Cutting it out cleanly lets us fix the base and replace just that section, but if you wait, the broken edges chip and water keeps working under the good slab next to it.
A line under the slab
When a leaking pipe or a new drain runs under your garage floor or patio, someone has to get through the concrete to reach it. A sawn trench keeps the opening tight and straight, while breaking it out with a hammer tends to crack the slab well past where anyone meant to open it.
New concrete meets old
If you're adding onto a driveway or patio and the old edge is ragged or crumbling, the new pour won't sit right against it. We saw back to sound concrete so the two slabs meet on a straight, solid line instead of a weak spot that cracks first.
How we handle concrete cutting on your job
First I ask what surface you need cut, whether it's a driveway, a garage floor or a wall, so we show up with the right saw instead of making a second trip. Before the blade starts, we go over any pipes or lines in the slab with you and mark the cut. We cut wet so the dust stays down, and we vacuum up the slurry, the gray water and concrete paste the blade leaves behind, instead of letting it wash to the street drain. When the cut is done, we either leave the pieces for you or break them up and haul them off, whichever your estimate says.
Cutting is often the first step of a bigger job. If the old slab is too far gone to patch, we can cut out what's left and handle the concrete driveway building from the base up, and the same goes for concrete patio construction when you're extending or replacing a patio.
Cutting out a damaged section
This suits a driveway, walk or patio where one or two panels failed and the rest is sound. You keep the good concrete and pay to replace only what's broken.
Trench cuts for pipes and lines
This is for garage floors, slabs and patios where a plumber or electrician needs a narrow path through. Two straight cuts keep the opening small, so the patch afterward is small too.
Openings in a concrete wall
This fits a new door or window in an existing concrete or block wall. It takes a different saw than floor work, so tell us it's a wall when you call.
Get a written price for your concrete cutting job
We reply within one business day to set a time, and the on-site estimate is free with no pressure to book. I come out myself, look at the concrete, and you get the price in writing with what's included.
- Based in
- Merced, CA 95340
- Hours
- Mon–Sun: 8 AM–9 PM
What happens when you call us about concrete cutting in Merced?
From your first call to the last of the cleanup, here's how a cutting job runs and what you'll know at each step.
Call and tell us the job
You call or send the form, and I come out to look at the concrete. I'll ask what you plan to do once it's cut, since that changes where the line goes and how deep.
Get the estimate in writing
You get a written estimate that says what's covered, including whether we haul the pieces away and how the slurry gets handled. That way the price you see is the price for the whole job, not just the sawing.
Settle the plan before cutting
We agree on the cut line, any lines in the slab and how we'll protect the area before the saw comes off the truck. Nothing gets cut until that plan is clear to both of us.
Cut, clean up, done
On cutting day we work quickly, keep the water and dust contained and clean up the slurry before we leave. You walk the finished cut with us so you can see exactly what you're getting.
Why Merced homeowners call Standard Merced Concrete for concrete cutting
I look at every job myself
I come out to see the concrete before you get a price, and I'm on site running the crew when we cut. You talk to the same person from the estimate to the cleanup, so nothing gets lost between the visit and the work.
Trained on crews, running jobs since 2023
I spent summers through school on concrete crews and started this business in 2023 to run jobs the way I was taught. That means we read the slab first and move fast once the plan is set, without cutting corners.
Licensed and insured, every job
We're licensed and insured, and you can ask to see it at the estimate. Cutting a slab near your house and its lines is the kind of job where that matters.
Based in Merced, working nearby
We're based in Merced and work across the cities around it, including ones not listed on this site. Being close means we can come look at your concrete without a long wait.
The part I care about most is the work you don't see on cutting day, like knowing what's in the slab and where the water goes. Have the surface, a rough length of cut and whether it's indoors or out ready, then send us your job or call (209) 308-1029.
Concrete cutting and slab work around Merced
Merced County says runoff that reaches the catch basins along the street isn't treated and goes straight into the county's waterways. Cutting slurry is heavy with fine concrete, so on every outdoor job here we keep it out of the gutter and off the street, and your estimate says who collects it and where it goes.
California's rule for construction crews calls for walk-behind saws that keep feeding water to the blade, so the silica dust from the cut stays out of the air. That's why we cut wet even on small jobs, and it's why containing the slurry matters. Across Merced we mostly cut into older driveways, garage floors and patios that people want to fix or add onto, and we see the same calls on jobs in Atwater and Turlock.
Questions about concrete cutting in Merced
How much does concrete cutting cost in Merced?
Saw cutting a concrete slab across the US usually costs about $4 to $15 per linear foot, and that covers the sawing, not breaking up or hauling the pieces. On small jobs, minimum or trip charges can make up most of the bill, and indoor cuts often cost more because of the extra water and dust control. Ask what a price covers, since removal and disposal can add more than the cutting itself.
Who cleans up the slurry from concrete cutting?
That should be settled in the estimate, before anyone cuts. One industry specification calls for the owner and the cutter to agree on how slurry gets collected and disposed of ahead of time, so there's no argument over a gray mess on your driveway afterward.
Do I need to find utility lines before concrete cutting?
Yes, usually you do. One industry specification puts the owner in charge of finding lines in or near the concrete, having those services shut off, and calling the right agency to locate buried lines where state or local rules require it. Plan those steps before the cutting date so the job isn't pushed back.
How do I know which concrete cutting method my job needs?
The surface you're cutting decides it. Flat sawing with a walk-behind saw is the most common method and covers floors, driveways, sidewalks and pavement, while wall sawing is the standard way to cut door and window openings, with the saw riding a rail bolted to the wall to keep the cut straight. Tell us the surface when you call and we'll know which one fits.
Do I need a scan before cutting a concrete slab?
If the slab is structural or post-tensioned, built with steel cables pulled tight inside it, you may need a scan first. A scan finds rebar, the steel bars that hold a slab together, along with tensioned cables, conduit, pipes and anything else buried in the concrete. If your slab might be that kind, plan time for the scan before cutting day.
What license does a concrete cutting contractor need in California?
California's contractor classifications list concrete sawing, breaking and coring under the D-6 Concrete-Related Services class. Whoever you hire, ask about their license and insurance before the saw comes out.
Concrete work that often follows a cut
Concrete driveway building
When the cut shows the old driveway has failed past patching, we dig out, rebuild the base and pour a new driveway that handles your cars.
Concrete patio construction
After we trim a cracked or crooked patio edge, we can pour a new or bigger patio that meets the old concrete on a clean, straight line.
Concrete cutting across Merced and nearby cities
Standard Merced Concrete is based in Merced, California, and cuts concrete in the 12 cities listed here, including Atwater and Madera. We also work in other cities nearby, so call even if yours isn't on the list.
Merced, CA
Tell us what you need cut
If you know the surface, a rough length for the cut and whether it's indoors or out, we can give you a much closer answer on the first call.